Electronics : Toshiba DVR660 1080p Upconverting VHS DVD Recorder with Built in Tuner |
|
|
see more
see more
Rating:  - * Toshiba DVD/Recorder ... So far this has been a great product. Set-up is easy and I have not had any problems putting old VHS recordings onto DVD. I think this is a great product. Rating:  - * For copying video tapes not for the family room ... If you read the specifications for this machine it appears to be a dream and it does appear to have all the features specified and some very cool features not well documented. One would expect the latest and greatest to be the most forward looking, with this expectation I was surprised at what I have come to expect as standard features to be missing or retro. * Even though DVD+RW is the superior technology, all the "better" recording features are only supported by DVD-RW! For example, 16:9 aspect ratios, scene delete, combine titles, etc. To me this alone warrants the loss of a rating star. * The recording of HDTV programs will become a mandatory ability in February of 2009. I recorded several HD programs on DVD+RW media and played them back, at the six hour speed, they were so badly pixilated as to be nearly unwatchable (probably too much up and down converting). When I recorded NTSC (normal until 2/2009) TV the recording were no better nor worse than on machines without ATSC/QAM receivers. This needed to be much better than it is. * My last three recorders have all been Panasonic's not by conscious choice or loyalty, but rather more as coincidence and superior ratings, at the time. I expect that when I define a program to record I can name the recording (on the DVD side) so that I know what is on the disk. This is not available on this machine. After you record you can label what you have recorded, this is exactly backwards from my expectations. * VCR output is analog ONLY on RCA pin-outs not even via s-video, let alone HDMI! The TV signal continues to play out of the HDMI while the video plays. This has additional ramifications for dubbing or cross-recording below. Perhaps the single most confusing and frustrating thing about this machine is setting the timer (programmed recording). I have been programming VCRs/DVD recorders for 30+ years and I have been a computer programmer for the bulk of this time too, so I am not easily confused by setting up a recorder and scheduling a program for recording. Besides the retro programming features above you will very likely lose or fail in your initial scheduled recording efforts. You will see an E40 error reported for the failure, unhelpfully meaning overlapping recording or recording did not start on time. What has happened is you did not press the "timer set" button, unobviously located in the middle of the last row of the remote! If you press the "red on/off button", on the remote, no recordings will be made (thus making it nearly impossible to use a universal remote on this machine as the "timer set" will probably not be defined). The unit MUST be TURNED OFF using the "timer set" button or NOTHING will be RECORDED!!! This has been so confusing I redundantly record on another device to insure I get the program. This warrants at minimum the loss of at least one rating star perhaps two. A recorder should never let you miss a recording (when properly programmed) except for a very good reason, e.g. disk full or overlapping programs. This one lets you miss all of them for silly illogical reasons. Suppose you record "The Soup" every Friday on E!, but in between you wish to watch an episode of HBO's Rome on a DVD. Well if you press the power button (red on/off button) you will not be able to access the DVD player. It is locked for recording on Friday. The only way to access it is to press the ... you guessed it, the "timer set" button. Of course doing that kills all the programmed recordings, so you better remember to press it again or you will lose the ability to record all future programmed recordings (i.e. miss The Soup until you press the "timer set" button)! Pressing the more obvious red on/off button is not going to fix it, but only yield an e40 error. I expect that the latest machines would have superior image processing. Sadly it is no better than a $50 Sam's Club special, when I visually compare the two on the same "passage" of a program. Obviously without an S-video out for any video tapes, a player with S-video will look better. My primary purpose in purchasing this machine was to cross copy/dub family videos. Recording at various speeds does seem to be clean and as good as can be expected. I was very concerned that there is no way adjust the tracking on video tapes however this seems to be pretty smart and appears to be constantly adjusting for the best setting. It has worked on all the videos I have tested so far. However if you have the DVD on an HDMI or S-video connection you will need to switch back and forth between two outputs on your TV to see and cue your video then switch to the other side to set up and start the dubbing process! There is, of course, the usual problem of playing DVD+/-RW on a PC the only reliable player I have found for this problem is VLC media player portable, a freeware player. A cool feature is the ability to watch what you are recording with DVD-RW, and have it keep track of where you are. In short this looks like it might be a pretty good dubbing/cross recording video machine but as a general purpose family room player I think there are cheaper and better choices on the market today. |
